Custom Barstool Cushions in Sunbrella Fabric – Made in the USA

By default, our cushions are made with square corners. However, you can customize them with rounded corners to better fit your furniture.

Each rounded option features a 2½-inch radius for a smooth, finished look.

• Round Top Corners – the two upper corners are rounded.
• Round Bottom Corners – the two lower corners are rounded.
• Round Front Corners – the two front-facing corners are rounded.
• Round Rear Corners – the two back-facing corners are rounded.

If you need a larger radius or a unique corner shape, we can accommodate that too. In those cases, we’ll need a template from you. Contact us for more details.

Chaise Cushions:

• Corners only apply to first and last section.
• Corners are not applied between section breaks.

Choose Your Fabric:

• Standard Fabric: Use our Fabric Library to choose your favorite.
• Sunbrella Rain: 100% waterproof with an interior barrier, stitched with Aqua-Seal thread to keep maximum amount of moisture out.

Customer Own Material (COM):

Send your own commercially available fabric for custom cushions. Lead times begin once we receive your material. Handmade, used, defective, or unsuitable fabrics cannot be used. See additional details under our Terms & Conditions.

• Yardage & Pattern Info: Provide fabric width, type (solid, stripe, plaid, pattern), repeat size if applicable, and welt details. Confirm large repeats over 16" before ordering.
• Fabric Details: Include vendor, brand, color, pattern, reversible info, and direction for stripes/patterns. Clearly mark body vs. welt fabrics.
• Preparing & Sending Fabric: Roll fabric, protect with cardboard/plastic, and label with your name and order number. Include order confirmation and all fabric info. Use a shipping service with tracking and insurance.

Shipping Address:

eCentral Stores – Customer’s Own Material
10820 US HWY 19 N
Clearwater, FL 33764

Glossary of Terms

• Fabric Repeat - The distance between repeating elements in stripes, patterns, or plaids. Measure from a point in the design to the same point in the next repeat.
• Horizontal Repeat - Pattern runs across the width of the fabric (railroaded).
• Vertical Repeat - Pattern runs down the length of the fabric.
• Effects on Yardage - Estimated fabric is calculated in multiples of the repeat. For example, a 15" repeat for a 30" cushion requires at least 3 repeats (31" total) to complete the project.

Cushion comfort is personal—everyone prefers a different feel. We use only top-quality foam, but comfort is subjective, so we can’t guarantee every preference. All options are rated for indoor and outdoor use. Here’s some helpful info for your research:

Medium Firm Foam with Dacron Top

• Polyurethane Foam: Density 1.6 – 1.8, Compression 30 – 36
• Topped with 1-inch Polyester Fiber Dacron

Medium Firm Foam with Dacron Wrap

• Polyurethane Foam Density 1.6 - 1.8, Compression 30 - 36
• Wrapped with 1-inch Polyester Fiber Dacron, on Top, Bottom and the Front areas
• The Dacron Wrap Adds a Minimum of 1/2 inch to the Thickness

Firm Foam with Dacron Top

• Polyurethane Foam Density 1.6 - 1.8, Compression 45 - 50
• Topped with 1-inch Polyester Fiber Dacron

Firm Foam with Dacron Wrap

• Polyurethane Foam Density 1.6 - 1.8, Compression 45 - 50
• Wrapped with 1-inch Polyester Fiber Dacron, on Top, Bottom and the Front areas
• The Dacron Wrap Adds a Minimum of 1/2 inch to the Thickness

EZ Dry

• Reticulated Foam Density 1.6 - 1.8, Compression 30 ILD
• No Dacron

Polyfill (Back Cushions Only)

• Polyester fiber-filled insert
• Polyester cover with 100% pure polyester fiberfill
• Non-allergenic

Square/Rectangle

• Most common and versatile
• Great for chairs, benches, and window seats
• Measured by width × depth × thickness

Round

• Perfect for stools, ottomans, and accent seating
• Measured by diameter × thickness

Isosceles Trapezoid

• Ideal for wedge-shaped seats or unique furniture angles*
• Measured by front width × back width × depth × thickness
• When Shape is Trapezoid, the entered Seat Rear Width will automatically match the Back Lower Width. And the entered Back Lower Width will automatically match the Seat Rear Width.

Unique or Irregular Shape

• Templated: Customers create and provide templates (paper, cardboard, or similar) that accurately represent the cushion or product shape and size.
• Patterned: Customers may provide an existing cushion or product as a pattern to replicate dimensions, shape, and fit.

General Requirements

• All templates and patterns must be clean and free of dirt, debris, mold, and mildew. A cleaning fee will apply if items are received dirty.
• Templates and patterns become the property of OutdoorFabricCentral.com and will not be returned unless prior arrangements are made.
• Additional charges apply for the use of templates or patterns in production.
• Ship your template or pattern to:
  eCentral Stores
  Templating Dpt. – (order #)
  10820 US HWY 19 N
  Clearwater, FL 33764

Width:

• Cushion Width, is the horizontal dimensions of the cushion in the left to right direction. Face the cushion or piece of furniture where the cushion will be placed. The back width of seat cushion and the bottom of a back cushion is also where the zipper will be placed. Measured from seam to seam. Any dimensions over 52 inches may require a visible seam.

Depth:

• Cushion Depth, refers to the front to back for seat cushion. Face the cushion or piece of furniture where the cushion will be placed. Measured from seam to seam. Any dimensions over 52 inches may require a visible seam.

Length:

• Cushion Length refers to the front to back for seat cushion. Face the cushion or piece of furniture where the cushion will be placed. Any dimensions over 52 inches may require a visible seam.

Height:

• Cushion Height, is the vertical dimension of the cushion top to bottom. Face the cushion or piece of furniture where the cushion will be placed, making sure to deduct the height of the seat cushion that it will be sitting on. Measured from seam to seam.

Thickness:

• Cushion Thickness, whether for a Seat\Bed or Back\Headrest is the sidewall or middle dimension, which offers comfort and support. Measured from seam to seam. If selecting Joining Pinched, the Seat Thickness and Back Thickness must match. When selecting Pinched method, thickness only available for cushion(s) 3 to 6 inches thick.

Diameter:

• Cushion Diameter, is the horizontal dimensions of the cushion in the left to right direction. Face the cushion or piece of furniture where the cushion will be placed. The back width of seat cushion and the bottom of a back cushion is also where the zipper will be placed. Measured from seam to seam.

Add Cushion Ties

• Ties are 12"-14" in length.
• 1/2" double folded and top stitched.

Available Tie Positions:

Seat / Bed

• 2 ties sewn in front corner
• 2 ties sewn in side center
• 2 ties sewn in rear corner

Back / Headrest

• 2 ties sewn in top corner
• 2 ties sewn in side center
• 2 ties sewn in bottom corner

Tip:

• Contact us if a specific location is needed.
• Velcro ties are available for an up-charge. Contact us for more details.

Single or Double Welt (or piping) adds approximately 3/8" all the way around but is not included in the seam-to-seam finished measurement.

If you choose Double Welt, we'll add a Dacron wrap to the foam fill (when applicable) for a higher-quality finish.

Cushions and pillows come standard with marine-grade zippers. Cushion zippers wrap around the back corners 2-3 inches for easy removal of covers.

All our cushions and pillows come with white or black zippers and thread. We match the zipper and thread color and base the decision on your fabrics color and style. For clarification please contact us.

All seams are internally surged for easy care & maintenance.

All seams are sewn with 10-12 stitches per inch. This is higher than industry standard and represents the highest quality construction.

The size of your cushion is larger than the available fabric width. To ensure a perfect fit, we'll add a vertical seam down the center of your cushion. This is a standard solution and does not affect durability or comfort. If you would like more information, please call customer service at 727.597.4134.