Custom Indoor / Outdoor Cushion Builder

Current Production Time: Approximately 3-4 weeks.* Get $100 Off Any Cushion Order of $1000 or more! Use Coupon Code: builder Ordering more than 20 cushions? Find a lower price? Call us! 1-866-516-0934
how to use builder
Estimated Price:
$0.00
$0.00
Free Shipping *Free Shipping *

Choose a Cushion Type :   Select one of the option(s) below:

    Shape Select one of the option(s) below:

    Cushion Part Select from the option(s) below:

    Sets Select one of the option(s) below:

    Breaks / Sections Select one of the option(s) below:

    Joining (optional)

    The Hinged method is best for cushion(s) over 3 inches thick. The Hinge is a matching fabric flap just over the thickness dimension.

    The Pinched method is only available for cushion(s) up to 4 inches thick. Pinched cushions join at the middle near the zipper.

    Cover Only (optional)

    By selecting cover only, you will receive only the cover and no fill. The dimensions you provide should not include the welt, measure between the welt or cord. We are not responsible for reduced quality fill due to age, when covers are made within our tolerances. We recommend fill be replaced every 2 to 5 years depending on use and type.

    Sunbrella RAIN (Quick Dry)

    Sunbrella Rain is a 100% waterproof Sunbrella upholstery fabric, there is an added waterproof layer on the inside of the fabric. We use Aqua-Seal, a specialized thread, that once it gets wet it will expand in the sew holes, keeping moisture out.

    Dimensions :   All of our cushions and pillows include zippers. Zippers are appropriately placed for each style of cushions or pillow. Zippers will wrap around the width up-to 2 inches for ease of fill. If other zipper locations need to be specified, please click here to contact us for a quote. Throw Pillows, when filled will be approximately 1 inch smaller than your specified dimensions. If you want an 18 inch X 18 inch Throw Pillow you would need to order a Throw Pillow approximately 19 ½ inch X 19 ½ inch.  Show How To Measure Pillows Video Fill out the input fields below to proceed:

    Fill :   Select one of the option(s) below:

    • Our most popular fill for seat cushions and most popular in the 3-inch to 4-inch thickness. We take a high quality polyurethane foam and wrap it in Dacron on the top, front, and bottom sides. Dacron is a deluxe feature that adds comfort and longevity to our cushions. By doing so it will increase measurements a minimum of ½ inch.

    • It is a popular foam for our Bench, Window or Bay Window cushions and most popular in the 2-inch to 3-inch thickness. Also used where you require firmer fill in a seat or back. We take a high quality polyurethane foam and wrap it in Dacron on the top, front, and bottom sides. Dacron is a deluxe feature that adds comfort and longevity to our cushions. By doing so it will increase measurements a minimum of ½ inch.

    • It is a commercial-grade polyurethane foam. The fire retardancy passes the CAL 117-2013 and NFPA260. We take a high quality polyurethane foam and wrap it in Dacron on the top, front, and bottom sides. Dacron is a deluxe feature that adds comfort and longevity to our cushions. By doing so it will increase measurements a minimum of ½ inch.

    • It is a commercial-grade polyurethane foam. The fire retardancy passes the CAL 117-2013 and NFPA260. We take a high quality polyurethane foam and wrap it in Dacron on the top, front, and bottom sides. Dacron is a deluxe feature that adds comfort and longevity to our cushions. By doing so it will increase measurements a minimum of ½ inch.

    • It is a firm reticulated foam best suited for outdoor and marine use. The porous open cell design allows water to pass directly through the foam. We do not wrap this foam with Dacron. DryFast foams have large open pores that allow air flow and water drainage. So if moisture penetrates your Sunbrella Rain cushion seams, the cushion will dry almost immediately.

    • This is a non-woven polyester insert for indoor or outdoor use. The cover is made from a polyester with 100% pure polyester fiberfill filling. This insert is non-allergenic and hand washable.

    • Indoor / Semi-Outdoor / Cotton Cloth Insert. Utilizes a high thread count covering, similar covering as used in high-end stores, 100% pure polyester fiberfill filling. This insert is non-allergenic and machine washable.

    • For indoor use only. A hypoallergenic alternative to animal down that is ultra-soft with the same look and feel of traditional down with a karate chop look. Utilizes a high thread count covering that is filled with polyester known as micro-denier and non-allergenic.

    • This is a non-woven polyester insert for indoor or outdoor use. The cover is made from a polyester with 100% pure polyester fiberfill filling. This insert is non-allergenic and hand washable.

    Sunbrella RAIN Details :  


    Sunbrella RAIN Top Sellers :

    Application :   Select one of the option(s) below:


    Application Details :


    Application Top Sellers :

    Fabric :   Select your fabric(s) below:

    Fabric (Customer's Own Material) :  

    • inches
    • inches
    • inches

    Details For (Customer's Own Material) :   Please provide us with additional information about your material :

    Striped / Patterned Fabric:

    • The direction of the stripes / patterns will be front to back and / or top to bottom.
    • Any cushion(s) with a dimension over 52 ½ inches would require a seam.
    • If you have any questions or different needs, please call 727-524-1120 or email: quotes@patiolane.com.

    Welting :   Select one of the option(s) below:

    Why is there no welting on Sunbrella RAIN fabrics?
    The properties of RAIN fabric and the bull-nose/waterfall cushion design encourage water run-off, which is why we do not use welt on cushions with Sunbrella RAIN fabric. Using welt with RAIN fabric does two things;

    1. Creates holes in the fabric that may create an entry point for water.
    2. Creates a barrier, limiting water from freely flowing off the cushion, causing water to stand/pool, and increasing the likelihood of water entering the holes created by the welting process.

    Welt Fabric (Customer's Own Material) :  

    • inches
    • inches
    • inches

    Details For (Customer's Own Material) :   Please provide us with additional information about your material :

    Corners :   Select the from the option(s) below:

    The front & top will automatically be "bullnose / waterfall" to meet Rain specs.

    Ties :   Select one of the option(s) below:

    Review :  


      See a bug? Report it to us! Don't see what you need? Get a quote!


      LiveZilla Live Chat Software